Fun LED Project Kits For Clubs #3 - 10 Sets (#4478)
This is the LED Blinky Kit. This neat hobby project produces an alternating LED sequence through a two-transistor Multivibrator (Flip-Flop) circuit. Each leg has its own adjustment to provide different timing effects.
The PCB is double-sided, plated thru-hole, 1.20" long x 2.20" wide made of .062" FR-4 epoxy glass. It has green Solder Mask (LPI) on both sides with white Silk Screen on the Top side and four mounting holes.
You will get 10 sets of these.
This kit does not include the tools you will need to assemble the circuit. You will need tools such as a soldering iron, solder, wire cutters, etc. To assemble the kit, open and print the Schematics and the Parts List below. The General Instructions are helpful notes.
General Instructions Schematics Parts List
