NE5532 Dual SMT Op Amp Kit w/ SMT PCB (#2813)

This is the NE5532 Dual Low-Noise SMT Op Amp IC Design Kit. It includes the very popular SMT version of the NE5532 Dual Low-Noise, High-Performance Operational Amplifier. This is an excellent low-noise dual Op Amp and has been used in many types of circuits through the years. This version is in the 16-pin SMT package. It has a 10MHz Bandwidth and can drive 600 Ohm loads. Check the Datasheet for more info. With this kit, you also get a few pieces each of the MMBT3904 (NPN) & MMBT3906 (PNP) SMT Transistors and some SMT Variable Voltage Regulators, LM317M, in the SMT package.

This kit also includes a tremendous amount of different SMT components that you would use to develop numerous circuits. Included are different values of SMT Resistors, SMT Power Resistors, SMT Resistor Arrays, SMT Aluminum, Ceramic & Tantalum Capacitors, SMT Electret Microphone, SMT Speaker, SMT Signal & Zener Diodes, SMT Trimpots, SMT LEDs (RED, GREEN, YELLOW, BLUE, & WHITE), and some Pushbutton Switches. It also includes some electronic hardware that are used in most projects for I/O.

This SMT Kit also includes an SMT Prototyping PCB to be used for building your circuits on. It is Single-Sided for ease of use, FR-4 epoxy-glass, is 2.7" x 1.9", and has 4 corner holes for mounting. The columns and rows are clearly marked on the bottom side. There is a Power and Ground bus running down the center which makes it easier to connect power to and reduces system noise. It will accept SMT and Thru-Hole components for optimum designs. This SMT PCB will also fit into the Tyco SnapTrack 2TK series rail.

With these parts, you can make numerous circuits such as Battery Monitors, relay drivers, signal conditioners, function generators and much more. Surface Mount Technology (SMT) components have no leads, this is a chance to get some SMT parts and learn to use them. You get the following: