Linear IC SMT Design Kit #1 with SMT PCB (#2660)

This is the SMT Linear ICs Design Kit #1. It includes some of the most popular SMT Linear ICs around including the LF351, the OP07, the LM741, and LM348 Op AMPs. You will also get an SMT Quad Comparator IC, an SMT Timer, an SMT Ground Fault Interrupter, an SMT Audio Amplifier, an SMT Adjustable Voltage Regulator, and SMT Bipolar & FET Transistors and more. All of these in SMT packages.

This kit also includes a tremendous amount of different SMT components that you would use to develop numerous circuits. Included are different values of SMT Resistors (1% & 5%), SMT Power Resistors, SMT Resistor Arrays, SMT Aluminum, Ceramic & Tantalum Capacitors, SMT Inductors, SMT Ferrite Beads, SMT Signal & Zener & Power Diodes, SMT Trimpots, SMT LEDs (RED, GREEN, YELLOW, BLUE, & WHITE), SMT Crystals, an SMT Electret Microphone, an SMT Miniature Speaker and Pushbutton Switches. It also includes some electronic hardware that are used in most projects for I/O.

This SMT Kit also includes an SMT Prototyping PCB to be used for building your circuits on. It is Single-Sided for ease of use, FR-4 epoxy-glass, is 2.7" x 1.9", and has 4 corner holes for mounting. The columns and rows are clearly marked on the bottom side. There is a Power and Ground bus running down the center which makes it easier to connect power to and reduces system noise. It will accept SMT and Thru-Hole components for optimum designs. This SMT PCB will also fit into the Tyco SnapTrack 2TK series rail.

With these parts, you can make numerous circuits such as Headphone Amplifiers, LED Drivers, Pedal Effects circuits, active filters, relay drivers, Audio pre-amps, signal conditioners, function generators and much more. Surface Mount Technology (SMT) components have no leads, this is a chance to get some SMT parts and learn to use them. You get the following: