TL081 JFET SMT Op Amp Design Kit w/ SMT PCB (#2928)

This is the TL081 JFET Op Amp SMT ICs Design Kit. It includes the very popular SMT version of the Texas Instruments TL081 JFET Operational Amplifier IC. This IC is pin-compatible with the LM741 and the TL071. These ICs have been used for decades and are still being used in many circuits. With this kit, you also get a few pieces each of the MMBT3904 (NPN) & MMBT3906 (PNP) SMT Transistors and some SMT Variable Voltage Regulators, LM317M, in the SMT package.

This kit also includes a tremendous amount of different SMT components that you would use to develop numerous circuits. Included are different values of SMT Resistors, SMT Power Resistors, SMT Resistor Arrays, SMT Aluminum, Ceramic & Tantalum Capacitors, SMT Inductors, SMT Ferrite Beads, SMT Signal & Zener Diodes, SMT Trimpots, SMT LEDs (RED, GREEN, YELLOW, BLUE, & WHITE), and some Pushbutton Switches. It also includes some electronic hardware that are used in most projects for I/O. 

This SMT Kit also includes an SMT Prototyping PCB to be used for building your circuits on. It is Single-Sided for ease of use, FR-4 epoxy-glass, is 2.7" x 1.9", and has 4 corner holes for mounting. The columns and rows are clearly marked on the bottom side. There is a Power and Ground bus running down the center which makes it easier to connect power to and reduces system noise. It will accept SMT and Thru-Hole components for optimum designs. This SMT PCB will also fit into the Tyco SnapTrack 2TK series rail.

With these parts, you can make numerous circuits such as Battery Monitors, relay drivers, signal conditioners, function generators and much more. Surface Mount Technology (SMT) components have no leads, this is a chance to get some SMT parts and learn to use them. You get the following: